LED House Number Plaque - Custom Font

Made to order LED house number plaques in your favourite font; choose any font! These are bespoke, high quality products designed and assembled here in the UK.

Please note due to high demand we have a waiting list for these products, and are currently closed for Christmas. Acrylic signs ordered during our closure will ship in the week commencing the 20th January 2025. Stainless steel or powder coated steel will be delivery in mid February if you order by January 7th. 

SIZES

one or two digits - 150mm high * 200mm wide

three digits - 150mm high * 250mm wide

Your house number plaque will be laser cut from 304 grade 3mm thick brushed stainless steel, with a 5mm frosted acrylic backing plate, and high quality long lasting LED units. You can also select a powder coating for an architectural grade finish in anthracite grey or black. There is also the option of matt black or charcoal grey acrylic. 

The material and colour options are as follows:
Black Acrylic (matt)
Charcoal Grey Acrylic (matt)
Stainless Steel (304 grade, brushed, silver in colour)
Black powder coating matt (over 304 grade stainless steel)
Anthracite grey powder coating matt (over 304 grade stainless steel)

The combinations shown are as follows: 289 in Johnston font with cool white LEDs, 33 in Bold Johnston font with warm white LEDs, and 10 in Helvetica with cool white LEDs.

Please note due to high demand we have a waiting list for these products, and lead time for stainless steel or powder coated steel is between 4 & 6 weeks, acrylic signs have a 2 week lead time. You will be advised on a delivery date when you place your order.

These prices include an IP rated outdoor hardwire driver and courier delivery to the UK.

The LED driver is a separate unit to the sign which will need to be installed into the mains electrics to power the sign, it is NOT on the back of the sign itself, 2m of low voltage cable is included in your order to allow flexibility to reach the mains.

Mounting the driver on the back of the sign is ideal if you have mains cable already in place where you want to install your number to replace an a previous external light, but this design does not have room on the back. An integrated LED driver can be mounted on the back of the signs in our larger century gothic plaque range only, choose from our horizontal or vertical design options. 

We will contact you with an image of your particular number combination to approve before production.

The plaque will be supplied with hidden fixings for wood or masonry, which allow it to stand-off from the wall and for the light to flood the area at the back of the number. Your plaque will be delivered with complete instructions for installation into the mains electricity supply.

LEDs provide the combined benefit of low energy consumption and long life. The LEDs we use on these numbers are suitable for outside use in all weather conditions. Our LEDs come in Cool White (6000 Kelvin) or Warm White (3000 Kelvin). Please use the drop down menu to order your LED colour or contact us if you require anything different. Can illuminated house numbers or name plates be used with a dimmer? There are not enough LED modules on our illuminated numbers and small backlit plaques to produce an efficiency curve necessary to dim the modules successfully. This is because at 0.25 watts each they do not make up enough total wattage for the minimum load requirement of a dimmable driver which is 6 -7 watts.

OUR ILLUMINARED HOUSE NUMBERS REQUIRE INSTALLATION INTO THE MAINS ELECTRICITY SUPPLY AND WE WOULD RECOMMEND THAT THEY ARE INSTALLED BY A QUALIFIED ELECTRICIAN

PLEASE NOTE: Our LED Illuminated products can only be supplied to the UK and Ireland due to limitations on adapting these products for use with overseas electrical supplies.